Composition and maintenance knowledge of fully automatic Paraffin forming machine
The fully automatic paraffin molding machine is a common molding machinery processing equipment, which is easy to operate and clean. What are the components of a fully automatic paraffin wax molding machine and how to maintain it? Let’s introduce it below.
1. The fully automatic paraffin molding machine is mainly composed of a drum crushing dryer, a combustion furnace, a feeding screw, a discharging screw, a conveying pipe, a dust collector, an air shutoff device, an induced draft fan, a control cabinet, etc.
2. The bearing bears the entire load of the machine, so good lubrication has a great relationship with the life of the bearing. It directly affects the service life and operating rate of the machine, so the injected lubricating oil is required to be clean and well sealed.
3. Newly installed wheel hoops are prone to loosening and should be inspected frequently.
4. Pay attention to whether all parts of the machine are working properly.
5. Pay attention to check the degree of wear of the wearable parts of the fully automatic paraffin wax molding machine, and replace worn parts at any time.
6. Dust and other materials should be removed from the bottom shelf surface where the movable device is placed to prevent the movable bearing from moving on the bottom shelf when the machine encounters materials that cannot be broken, thus preventing danger.
7. If there is an impact sound when the rotating gear of the fully automatic paraffin molding machine is running, stop the machine immediately for inspection.
