【1】 Common faults in the transmission part of the paraffin forming machine
1. Common faults in the transmission system
During the maintenance work of the Kouchang production line, the chain transmission part of the two paraffin forming machines often experiences malfunctions such as jamming frames; Chain jumping teeth; Tension alarm; Chain knotting; Phenomena such as unsynchronized chains.
2. Analysis of common fault causes
The transmission faults of the fully automatic paraffin forming machine are interrelated and affect each other: the resistance on the tracks and sprockets is different, and the left and right chains are not synchronized, resulting in one side of the chain walking fast and the other side of the chain walking slowly. As a result, the wax tray walking is skewed. When the chain walks to the flipping guide rail, one side of the chain and the wax tray are subjected to greater force, which easily causes the frame to get stuck and the chain to jump, leading to a tension alarm and the production line to stop.
The causes of the faults are all caused by the unsynchronization of the left and right chains, so synchronizing the left and right chains can significantly reduce the failure rate of the paraffin production line.
【2】 Before using the wax wrench forming machine, perform a thorough inspection
The use effect of wax trigger molding machine has always been widely praised by users, but to maintain its good use effect, we need to conduct various inspections before using it to ensure that all parts of it can operate normally. Let's talk about the specific inspections before using this product. Please take a look.
1. Before using the wax wrench forming machine, it is also necessary to check whether the working environment can meet the requirements. If it cannot meet the requirements, the environment needs to be cleaned first.
2. Before using the equipment, it is necessary to check the equipment to see if there are any malfunctions. If there are any malfunctions, they should be promptly resolved.
3. Also, check if the voltage and current used by the device meet the requirements. If the voltage does not meet the usage requirements, the device cannot be started.
In summary, before using the wax wrench molding machine, we conducted relevant inspections, which played a bridging role in subsequent work and ensured the stability of subsequent work. If we insist on inspecting this product before use, it can not only improve everyone's work efficiency, but also indirectly extend its service life.
